ضخامت سنج خوردگی الکومتر Elcometer CG100
ضخامت سنج خوردگی الکومتر Elcometer CG100 مخصوص بررسی فلزات برند الکومتر ساخت کشور انگلستان مدل Elcometer CG100 با گستره ای از حالت های نمایش و اندازه گیری،کنترل خودکار و ثبت اطلاعات محدوده اندازه گیری ضخامت سنج خوردگی CG100 الکومتر برای اندازه گیری پوشش و ضخامت مواد همچنین برای تعیین محل عیوب بسیار مناسب است.
قیمت این دستگاه را می توانید از مجموعه بازرگانی ان دی تی کالا NDTKALA با 18 ماه گارانتی و ضمانت اصالت کالا دریافت نمائید. این محصولات و مابقی محصولات در این حوضه را میتوانید در دسته ضخامت سنج اولتراسونیک به راحتی مشاهده کنید.
کاتالوگ ضخامت سنج التراسونیک خوردگی فلزات CG100 ELCOMETER
ضخامت سنج خوردگی Elcometer CG100 دارای 4 مدل زیر می باشد:
- CG100B
- CG100BDL
- CG100 ABDL
- CG100 ABDL+
حالت های اندازه گیری ضخامت سنج Elcometer CG100 الکومتر به صورت اکو-اکو (Echo-Echo) و حالت پالس- اکو
(Puls-Echo) می باشد.
خروجی داده ها با USB و بلوتوث بر روی نرم افزار Elcometer وارد تحلیل می گردد.
ویژگی ها و مشخصات فنی ضخامت سنج التراسونیک خوردگی الکومتر ELCOMETER CG100 Corrosion Thickness Gauges:
پارت نامبر و مدل | CG100B | CG100BDL | CG100ABDL | CG100ABDL+ |
Material thickness digits display |
|
|
|
|
B-Scan cross sectional display |
|
|
|
|
Combined B-Scan and digits display |
|
|
|
|
Scan bar display |
|
|
|
|
Coating thickness display |
|
|
|
|
A-Scan Display |
+ Rectified, – Rectified, |
+ Rectified, – Rectified, Full Waveform (RF) |
||
Measurement Mode | PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT |
PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT |
PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT |
PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT |
Measurement Rate Manual: Scan mode Scan bar display |
4 readings per second 50 readings per second 6 readings per second |
4 readings per second 50 readings per second 6 readings per second |
4 readings per second 50 readings per second 6 readings per second |
4 readings per second 32 readings per second 6 readings per second |
Measuring Range |
PE: 0.63 – 508mm |
PE: 0.63 – 508mm |
PE: 0.63 – 508mm |
PE: 0.63 – 508mm |
Measurement Accuracy |
± 1% or ±0.1mm |
± 1% or ±0.1mm |
± 1% or ±0.1mm |
± 1% or ±0.1mm |
Measurement Resolution |
0.01mm (0.001 inches) |
(((0.01mm (0.001 inches)))) |
{{0.01mm (0.001 inches)}} |
0.01mm (0.001 inches) |
Velocity Calibration Range |
1250 – 13,995m/s |
1250 – 13,995m/s (0.0492 – 0.5510in/ms) |
1250 – 13,995m/s (0.0492 – 0.5510in/ms) |
1250 – 13,995m/s |
Additional Features: High speed scan mode |
|
|
|
|
Differential mode |
|
|
|
|
Limit alarm mode |
|
|
|
|
B-Scan display speed | 15 seconds per screen |
15 seconds per screen |
Adjustable display speed | Adjustable display speed |
Flaw mode |
Basic prove-up flaw detection using single element angle beam transducers |
Basic prove-up flaw detection using single element angle beam transducers | ||
Calibration setups | ))6 factory & 64 user-definable setups transferrable to and from a PC archive(( |
6 factory & 64 user-definable setups transferrable to and from a PC archive |
((6 factory & 64 user-definable setups transferrable to and from a PC archive)) |
6 factory & 64 user-definable setups transferrable to and from a PC archive |
Gates | 3 fully adjustable gates: start, stop, width & threshold | 3 fully adjustable gates: start, stop, width & threshold | ||
Damping | Adjustable; impedance matching for optimising transducer performance | |||
Pulser type |
Dual square wave pulsers up to 140Hz pulse repetition rate |
{Dual square wave pulsers up to 140Hz pulse repetition rate} |
Dual 200 volt square wave pulsers with adjustable pulse width(spike, thin, wide) and 50 volt cut/boost for greater penetration |
Dual 200 volt square wave pulsers with adjustable pulse( width) (spike, thin, wide) and 50 volt cut/boost for greater penetration |
Gain | Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi |
Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi |
Manual, automatic gain control (AGC) with 110dB range (limited) |
Manual, automatic gain control (AGC) with 110dB range (limited) |
Timing |
((Precision 25MHz TCXO with single shot ))100MHz 8bit ultra low power 8 bit digitizer |
(Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer) |
Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer |
{Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer} |
Data logging |
|
|
|
|
Calibration Options |
(Single, two point, velocity & material type) |
Single, two point, velocity & material type |
{Single, two point, velocity & material type} |
Single, two point, velocity & material type |
Transducer Probe Type | Dual element |
{Dual element} |
Dual element & flaw prove up |
Dual element} & flaw prove up} |
Transducer Frequency Range | 1 – 10MHz | 1 – 10MHz | 1 – 10MHz | 1 – 10MHz |
Transducer recognition | Automatic & manual – selectable from a list | Automatic & manual – selectable from a list | Automatic & manual – selectable from a list | Automatic & manual – selectable from a list |
V-path / dual path error correction | Automatic | Automatic | Automatic | Automatic |
Probe zero | Automatic & manual (via integrated probe disk) | Automatic & manual (via integrated probe disk) | Automatic & manual (via integrated probe disk) | Automatic & manual (via integrated probe disk) |
Display | 1/8 VGA (grayscale) 62 x 45.7mm (2.4 x 1.8 inches) viewable area |
1/8 VGA (grayscale) |
1/8 VGA (grayscale) |
1/4 VGA AMOLED colour display 57.6 x 43.2mm (2.27 x 1.78inch) viewable area |
Display Refresh Rate | 25Hz | 25Hz | 25Hz | 120Hz |
Units (selectable) | mm or inches | mm or inches | mm or inches | mm or inches |
Backlight |
on / off / auto |
on / off / auto | on / off / auto | adjustable brightness |
Repeatability / Stability Indicator |
|
|
|
|
Battery Type | 3 x AA alkaline | 3 x AA alkaline | 3 x AA alkaline | 3 x AA alkaline |
Battery Life (approximate) | 150 hours | 150 hours | 50 hours | 25 hours |
Low Battery Indicator |
|
|
|
|
Battery Save Mode | auto | auto | auto | auto |
Operating Temperature | -10 to 60ºC (14 to 140ºF) | -10 to 60ºC (14 to 140ºF) | -10 to 60ºC (14 to 140ºF) | -10 to 60ºC (14 to 140ºF) |
Size (w x h x d) | 63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) |
63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) |
63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) |
63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) |
Weight (including batteries) | 383g (13.5oz) | 383g (13.5oz) | 383g (13.5oz) | 383g (13.5oz) |
Aluminium case design with gasket sealed end caps, waterproof membrane keypad |
|
|
|
|
Transducer Connector Type | LEMO | LEMO | LEMO | LEMO |
RS232 Interface | Bi-directional | Bi-directional | Bi-directional | Bi-directional |
Packing List | Elcometer NDT CG100B gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries | Elcometer NDT CG100BDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable | Elcometer NDT CG100ABDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable | Elcometer NDT CG100ABDL+ gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable |
نقد و بررسیها
هنوز بررسیای ثبت نشده است.