یک ماه ضمانت بازگشت
پرداخت در محل
پشتیبانی 24 ساعته
ضمانت اصلی بودن کالانقد و بررسی
دستگاه عیب یاب التراسونیک Sonatest D70
دستگاه عیب یاب التراسونیک Sonatest D70
دستگاه عیب یاب التراسونیک برند سوناتست Sonatest مدل D70 ساخت کشور انگلستان با گارانتی 18 ماهه و ضمانت اصالت کالا ارائه شده توسط فروشگاه ان دی تی کالا NDTKALA به سراسر کشور. دستگاه عیب یاب Masterscan D-70 مجموعه‌ای از ابزارها و نرم‌افزارهای کاملاً کارآمد و کاربردی را برای بازرسی همه برنامه‌ها از جمله B-scan کدگذاری شده، ثبت ضخامت پیشرفته و قابلیت‌های Dryscan در یک محفظه قابل حمل به بازرس ارائه می‌دهد.
ویژگی های دستگاه عیب یاب التراسونیک Sonatest D70
- منوهای قابل تنظیم و ابتکاری
- تقسیم DAC / AVG / DGS
- حالت اندازه گیری زاویه
- قابلیت Dryscan
- نرم افزار قابل تنظیم روی برد فیلد
- قابل ارتقا B-Scan
- رمزگذاری شده A-Scan Fade
- 4گیگابایت حافظه داخلی
- رابط USB برای واردات / صادرات کامپیوتر
- خروجی ویدیو برای آموزش
مشخصات دستگاه عیب یاب التراسونیک Sonatest D70
| Test Range: | 0-1mm (0.04″) up to 0-20,000mm (787″) in steel @5930m/s (19455f/s). | ||||||||
| Velocity: | 256 – 16,000 m/s continuously variable. | ||||||||
| Probe Zero: | 0 to 1000 µs. | ||||||||
| Delay: | 0-20,000m (800″) in steel @ 5930m/s. | ||||||||
| Gain: | 0 to 110dB adjustable in 0.1, 0.5, 1, 2, 6, 14 and 20dB steps. | ||||||||
| Test Modes: | Pulse echo and transmit/receive. Single, Crystal, Double Crystal and Pitch-Catch. | ||||||||
| Damping: | 50 and 400 Ohm damping selectable. | ||||||||
| Pulser: | 100-450V -ve spike and square wave. Pulse Width from 30nS to 2,500nS. Rise/Fall times <5nS into 50R load. | ||||||||
| Active Edge™: | Unique Active Edge Mode for improved near-surface resolution. | ||||||||
| P.R.F: | Adjustable 5Hz to 5kHz. External sync also available. | ||||||||
| Screen Update Rate: | 60 Hz. | ||||||||
| Rectification: | RF, Full wave, +ve half-wave and -ve half-wave . | ||||||||
| Frequency Range: | 8 Selectable filter bands:
Additional tuned low frequency pre-amp with Dryscan option. |
||||||||
| System Linearity: | Vertical = 0.5% Full Screen Height (FSH). Horizontal = +-0.2% Trace Full Screen Width. | ||||||||
| Reject (Selectable): | Up to 80% Linear reject (removes baseline noise without affecting indication amplitude) OR Up to 50% Suppressive reject (increase zero offset and reduces amplitude of all echoes). LED warning when active. |
||||||||
| Units: | Metric (mm), Inch (in) or microseconds. | ||||||||
| Display: | Color Transflective VGA (640 x 480) TFT. | ||||||||
| Display Area: | 116.16 x 87.2 mm (4.57″ x 3.43″). | ||||||||
| A-Scan Area: | 400 x 510 pixels (normal), 460 x 620 (FS). | ||||||||
| Colors: | 9 color options with variable brightness. | ||||||||
| Gate Monitor: | Two independent gates for measurement and monitoring. Start and width fully adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visual alarms. Gate resolution is 5nS. | ||||||||
| Zoom: | Expands range and delay to cover the area set by Gate 1 start & width controls. | ||||||||
| AGC: | Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% abd 90% FSH, tolerance between 5% and 20%. | ||||||||
| Measurement Display: | Live display and updates on screen at 3 times per second. Large display of a single measurement available. | ||||||||
| Contour: | Trailing-Edge slew-rate control to reduce half cycles in rectified modes. Selectable from one of 6 levels. | ||||||||
| Waveform Smoothing: | Select from: i) None (both min and max values are displayed in the A-Scan) ii) Fill (Min values set to baseline value, produces a solid A-Scan) iii) Smooth (min values ignored, produces a clear outline A-Scan). | ||||||||
| Persistence: | Causes previous A-scans to “fade out” at a user-determined rate. | ||||||||
| Auto-Cal: | Provides automatic calculation of velocity and probe zero from 2 reference echoes. | ||||||||
| Reference Waveform: | Displays a previously stored A-log in a color different from the active display: enabling a quick visual check of the differences. | ||||||||
| Clock: | Built in, battery-backed RTC keeps time and date. Visible on the status line, always stored with Panels, A-logs etc. | ||||||||
| Internal Memory: | 4GByte storage available for A-scans, panels, T-logs, B-logs etc. 450,000 Panels, 200,000 A-Logs, 300,000 B-Charts, 440,000 T-Logs. | ||||||||
| Active Peak Memory: | Retains all A-scans on screen for echo-dynamic pattern analysis, with the active A-scan displayed in a separate color. | ||||||||
| Notes: | Alphanumeric labelling for panel stores, A-logs, B-logs etc. | ||||||||
| Display Freeze: | Hold the current waveform on screen for off-line processing. | ||||||||
| Help Key: | Shows software and hardware information. | ||||||||
| Language Support: | Multiple languages are selectable from a list including: English, French, Spanish, Russian, Chinese (Modern). Others are available on request. | ||||||||
| Encoder Connection: | Lemo min 4-pin connector. | ||||||||
| Video Output: | Factory Option on D-70. | ||||||||
| Proportional Outputs: | Not available on D-70. | ||||||||
| External Sync: | Not available on D-70. | ||||||||
| USB Connection: | Internal storage shown as Memory Device | ||||||||
| Transducer Sockets: | BNC or LEMO (factory option). | ||||||||
| Power: | Lithium Ion 14.4V battery pack. Typically 16 hours for 700M and 12 hours for D-70. Indication of battery charge status. Recharge time 3-4 hrs. Battery can be charged separately. Mains pack optional. | ||||||||
| Charger: | 100-240 VAC, 50-60 Hz. | ||||||||
| Environmental: | Designed to meet IP67. | ||||||||
| Temperature: | Operating -10o C to 55o C (14o F – 131o F). Storage -40o C to 75o C (-40o F – 167o F). | ||||||||
| Size: | H172mm x W238mm x D70mm (6.77in x 9.37in x 2.75in). | ||||||||
| Weight: | 1.7 kg (3.7lbs) with battery. | ||||||||
| Warranty: | 2 Year. | ||||||||
| Extended Warranty: | Sonacover – extended 5 year warranty, including 4 calibrations. | ||||||||
| Calibration Standard: | EN12668-1:2010 (Detailed Specification available on request). | ||||||||
| Standards: | Vibration to 514.5-5 Proc 1 Annex C Fig 6 Shock 516.5 Proc 1 15g/6ms Explosive atmospheres – MIL-STD 810G Method 511.5 Procedure I |
0دیدگاه کاربران