یک ماه ضمانت بازگشت
پرداخت در محل
پشتیبانی 24 ساعته
ضمانت اصلی بودن کالانقد و بررسی
آرماتور یاب و کاورمتر NOVOTEST Rebar Detector
دستگاه آرماتوریاب و کاورمتر Novotest Rebar Detector
دستگاه آرماتور یاب و کاورمتر میلگرد و آرماتور نواتست اکراین بر اساس روش تست غیر مخرب جهت ردیابی آرماتور مطابق استاندارد های BS 1881, Part 204 DIN 1045-SN 505262-SS 78-B4 با استفاده از روش فناوری مغناطیسی عمل می نماید. از ویژگی های آرماتوریاب می توان به محاسبه میزان عمق آرماتور و قطر آن اشاره نمود.
Concrete Cover Meter NOVOTEST Rebar Detector
(NEW GENERATION 2020)
Concrete Cover Meter NOVOTEST Rebar Detector is used to measure the thickness of the concrete cover, determine the location and estimate the diameter of rebar in reinforced concrete products in the conditions of enterprises, construction sites, buildings and structures in use.
The main advantages and tasks that the Concrete Cover Meter NOVOTEST Rebar Detector solves:
MEASURING THE THICKNESS OF THE CONCRETE COVER
Measuring the concrete cover of reinforced concrete structures is the main task of the Concrete Cover Meter NOVOTEST Rebar Detector. Depending on the diameter of the rebars, the device allows user to measure the thickness of concrete with a specified accuracy of up to 170 mm.
Concrete Cover Meter NOVOTEST Rebar Detector 2
Concrete Cover Meter NOVOTEST Rebar Detector 8
SCANING OF TESTED OBJECT
With a special mode, the user can scan an object for the presence of an rebar and its position. If necessary, the operator can use the audible signaling of the rebar presence, which eliminates the need for constant monitoring of the device display.
ASSESSMENT OF THE REBAR DIAMETER
The device has a special mode for assessing the diameter of the rebar, it is calculated during operations according to a special method during which the minimum distance to the rebar with and without a plate with a known thickness is measured, and the device calculates the expected diameter of the rebar using the correlation method.
Concrete Cover Meter NOVOTEST Rebar Detector 7
Concrete Cover Meter NOVOTEST Rebar Detector 6
DESIGN
The device is assembled in an ergonomic shock-resistant case, which allows it to be used in rather extreme conditions.
SPECIFICATION
Advantages
Specifications
Available options
Standard package
Media
Range of measuring the thickness of the protective layer, mm 5 … 170
Controlled diameters, mm 6-50
Measurement accuracy, mm (0,03 h + 0.5)
Standards
BS 1881, Part 204
DIN 1045
SN 505262
SS 78-B4
Overall dimensions, mm 122х76х36,5
Operating temperature, ° C -20 … +40 ° C
Power supply 2pcs AA batteries
Time of continuous work hours, not less 8
Weight of electronic unit with batteries, no more, kg 0.2
0دیدگاه کاربران