ضخامت سنج خوردگی الکومتر Elcometer CG100
ضخامت سنج خوردگی الکومتر Elcometer CG100 مخصوص بررسی فلزات برند الکومتر ساخت کشور انگلستان مدل Elcometer CG100 با گستره ای از حالت های نمایش و اندازه گیری،کنترل خودکار و ثبت اطلاعات محدوده اندازه گیری ضخامت سنج خوردگی CG100 الکومتر برای اندازه گیری پوشش و ضخامت مواد همچنین برای تعیین محل عیوب بسیار مناسب است. این محصولات و مابقی محصولات در این حوضه را میتوانید در دسته ضخامت سنج اولتراسونیک به راحتی مشاهده کنید. قیمت این دستگاه را می توانید از مجموعه بازرگانی ان دی تی کالا NDTKALA با 18 ماه گارانتی و ضمانت اصالت کالا دریافت نمائید.
کاتالوگ ضخامت سنج التراسونیک خوردگی فلزات CG100 ELCOMETER
ضخامت سنج خوردگی Elcometer CG100 دارای 4 مدل زیر می باشد:
- CG100B
- CG100BDL
- CG100 ABDL
- CG100 ABDL+
حالت های اندازه گیری ضخامت سنج Elcometer CG100 الکومتر به صورت اکو-اکو (Echo-Echo) و حالت پالس- اکو
(Puls-Echo) می باشد.
خروجی داده ها با USB و بلوتوث بر روی نرم افزار Elcometer وارد تحلیل می گردد.
ویژگی ها و مشخصات فنی ضخامت سنج التراسونیک خوردگی الکومتر ELCOMETER CG100 Corrosion Thickness Gauges:
| پارت نامبر و مدل | CG100B | CG100BDL | CG100ABDL | CG100ABDL+ |
| Material thickness digits display |
|
|
|
|
| B-Scan cross sectional display |
|
|
|
|
| Combined B-Scan and digits display |
|
|
|
|
| Scan bar display |
|
|
|
|
| Coating thickness display |
|
|
|
|
| A-Scan Display |
+ Rectified, – Rectified, |
+ Rectified, – Rectified, Full Waveform (RF) |
||
| Measurement Mode | PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT |
PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT |
PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT |
PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT |
| Measurement Rate Manual: Scan mode Scan bar display |
4 readings per second 50 readings per second 6 readings per second |
4 readings per second 50 readings per second 6 readings per second |
4 readings per second 50 readings per second 6 readings per second |
4 readings per second 32 readings per second 6 readings per second |
| Measuring Range |
PE: 0.63 – 508mm |
PE: 0.63 – 508mm |
PE: 0.63 – 508mm |
PE: 0.63 – 508mm |
| Measurement Accuracy |
± 1% or ±0.1mm |
± 1% or ±0.1mm |
± 1% or ±0.1mm |
± 1% or ±0.1mm |
| Measurement Resolution |
0.01mm (0.001 inches) |
(((0.01mm (0.001 inches)))) |
{{0.01mm (0.001 inches)}} |
0.01mm (0.001 inches) |
| Velocity Calibration Range |
1250 – 13,995m/s |
1250 – 13,995m/s (0.0492 – 0.5510in/ms) |
1250 – 13,995m/s (0.0492 – 0.5510in/ms) |
1250 – 13,995m/s |
| Additional Features: High speed scan mode |
|
|
|
|
| Differential mode |
|
|
|
|
| Limit alarm mode |
|
|
|
|
| B-Scan display speed | 15 seconds per screen |
15 seconds per screen |
Adjustable display speed | Adjustable display speed |
| Flaw mode |
Basic prove-up flaw detection using single element angle beam transducers |
Basic prove-up flaw detection using single element angle beam transducers | ||
| Calibration setups | ))6 factory & 64 user-definable setups transferrable to and from a PC archive(( |
6 factory & 64 user-definable setups transferrable to and from a PC archive |
((6 factory & 64 user-definable setups transferrable to and from a PC archive)) |
6 factory & 64 user-definable setups transferrable to and from a PC archive |
| Gates | 3 fully adjustable gates: start, stop, width & threshold | 3 fully adjustable gates: start, stop, width & threshold | ||
| Damping | Adjustable; impedance matching for optimising transducer performance | |||
| Pulser type |
Dual square wave pulsers up to 140Hz pulse repetition rate |
{Dual square wave pulsers up to 140Hz pulse repetition rate} |
Dual 200 volt square wave pulsers with adjustable pulse width(spike, thin, wide) and 50 volt cut/boost for greater penetration |
Dual 200 volt square wave pulsers with adjustable pulse( width) (spike, thin, wide) and 50 volt cut/boost for greater penetration |
| Gain | Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi |
Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi |
Manual, automatic gain control (AGC) with 110dB range (limited) |
Manual, automatic gain control (AGC) with 110dB range (limited) |
| Timing |
((Precision 25MHz TCXO with single shot) ))100MHz 8bit ultra low power 8 bit digitizer |
(Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer) |
Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer |
{Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer} |
| Data logging |
|
|
|
|
| Calibration Options |
(Single, two point, velocity & material type) |
Single, two point, velocity & material type |
{Single, two point, velocity & material type} |
Single, two point, velocity & material type |
| Transducer Probe Type | Dual element |
{Dual element} |
Dual element & flaw prove up |
Dual element} & flaw prove up} |
| Transducer Frequency Range | 1 – 10MHz | 1 – 10MHz | 1 – 10MHz | 1 – 10MHz |
| Transducer recognition | Automatic & manual – selectable from a list | Automatic & manual – selectable from a list | Automatic & manual – selectable from a list | Automatic & manual – selectable from a list |
| V-path / dual path error correction | Automatic | Automatic | Automatic | Automatic |
| Probe zero | Automatic & manual (via integrated probe disk) | Automatic & manual (via integrated probe disk) | Automatic & manual (via integrated probe disk) | Automatic & manual (via integrated probe disk) |
| Display | 1/8 VGA (grayscale) 62 x 45.7mm (2.4 x 1.8 inches) viewable area |
1/8 VGA (grayscale) |
1/8 VGA (grayscale) |
1/4 VGA AMOLED colour display 57.6 x 43.2mm (2.27 x 1.78inch) viewable area |
| Display Refresh Rate | 25Hz | 25Hz | 25Hz | 120Hz |
| Units (selectable) | mm or inches | mm or inches | mm or inches | mm or inches |
| Backlight |
on / off / auto |
on / off / auto | on / off / auto | adjustable brightness |
| Repeatability / Stability Indicator |
|
|
|
|
| Battery Type | 3 x AA alkaline | 3 x AA alkaline | 3 x AA alkaline | 3 x AA alkaline |
| Battery Life (approximate) | 150 hours | 150 hours | 50 hours | 25 hours |
| Low Battery Indicator |
|
|
|
|
| Battery Save Mode | auto | auto | auto | auto |
| Operating Temperature | -10 to 60ºC (14 to 140ºF) | -10 to 60ºC (14 to 140ºF) | -10 to 60ºC (14 to 140ºF) | -10 to 60ºC (14 to 140ºF) |
| Size (w x h x d) | 63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) |
63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) |
63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) |
63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) |
| Weight (including batteries) | 383g (13.5oz) | 383g (13.5oz) | 383g (13.5oz) | 383g (13.5oz) |
| Aluminium case design with gasket sealed end caps, waterproof membrane keypad |
|
|
|
|
| Transducer Connector Type | LEMO | LEMO | LEMO | LEMO |
| RS232 Interface | Bi-directional | Bi-directional | Bi-directional | Bi-directional |
| Packing List | Elcometer NDT CG100B gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries | Elcometer NDT CG100BDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable | Elcometer NDT CG100ABDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable | Elcometer NDT CG100ABDL+ gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable |
نقد و بررسی‌ها
هنوز بررسی‌ای ثبت نشده است.